Painting is a quick and easy way to liven up a listing. But some smart prep work can make a huge difference in the quality of the results. Here are some tips to help you get your home ready to list.
1.Get the surface ready.
You want the paint to glide on smoothly, so be sure the surface is clean before you start painting. Remove any handprints, dirt, or scuff marks. Lightly sand any glossy spots to avoid streaks.
2. Select a paint sheen and color.
Ah, the choices! Many paint stores are making it easier to narrow down your choices by offering small trial sizes so that you can test the color at home and look for any variations in daylight and night. Lighting has a big effect on the way color appears. Remember: Higher sheen paints tend to offer more durability than flat paints, so use them in high-traffic areas. Stain or low-lustre finishes offer more warmth and depth than a flat paint. Consider a high sheen paint on the ceiling, which offers good reflection in the room.
3. Don’t go cheap on the paint.
It’s always tempting to save a buck, but it might not be worth it on paint. Painting is a big job, so you want the expense and quality to show. The Rohm and Haas Paint Quality Institute, a national painting education group, recommends purchasing top-quality acrylic latex interior paint, which will go on smoothly and allow for easy soap and water cleanups.
4. Choose the right paint tools.
If you’re using a roller to paint, select the right length of roller nap cover for proper paint coverage. The smoother your painting surface, the shorter the nap should be. Use synthetic materials, which are made from nylon or polyester, when applying latex or water-based paints.
Source: The Rohm and Haas Paint Quality Institute
Saturday, October 31, 2009
Monday, October 19, 2009
How To Buy An Energy Efficient Home Appliance
You go shopping for a new refrigerator, and you’re on a budget. The best buy is the ’fridge with the lowest sales price, right? Not necessarily. If you buy the lowest-priced refrigerator, you may end up spending more than if you buy a more expensive one. The reason? The cost of owning a home appliance has three components: the initial purchase price, the cost of repairs and maintenance, and the cost to operate it.
To figure out how much you’ll spend over the lifetime of the appliance, you have to look at all these costs. The appliance with the lowest initial purchase price, or even the one with the best repair record, isn’t necessarily the one that costs the least to operate. Here’s an example of how an appliance’s energy consumption can affect your out-of-pocket costs.
Suppose you’re in the market for a new refrigerator-freezer. Different models of refrigerators with the same capacity can vary dramatically in the amount of electricity they use. For one popular size and configuration, for example, the annual electricity consumption varies across models from a low of about 600 kilowatt-hours a year to a high of more than 800 kilowatt-hours a year. Based on national average electricity prices, that means the annual cost to operate this refrigerator can range from about $50 to $70, depending on which model you buy. A $20 difference in annual operating costs might not sound like much, but remember that you will enjoy these savings year after year for the life of the appliance, while you must pay any difference in purchase price only once. As a result, you may actually save money by buying the more expensive, more energy-efficient model.
You can learn about the energy efficiency of an appliance that you’re thinking about buying through the yellow-and-black EnergyGuide label it displays. The Federal Trade Commission’s Appliance Labeling Rule requires appliance manufacturers to put these labels on:
• Refrigerators, freezers, dishwashers, clothes washers
• Water heaters, furnaces, boilers
• Central air conditioners, room air conditioners, heat pumps
• Pool heaters
When you shop for one of these appliances in a dealer’s showroom, you should find the labels hanging on the inside of an appliance or secured to the outside. The law requires that the labels specify:
• The capacity of the particular model
• For refrigerators, freezers, dishwashers, clothes washers and water heaters, the estimated annual energy consumption of the model
• For air conditioners, heat pumps, furnaces, boilers and pool heaters, the energy efficiency rating
• The range of estimated annual energy consumption, or energy efficiency ratings, of comparable appliances.
Some appliances also may feature the EnergyStar logo, which means that the appliance is significantly more energy efficient than the average comparable model. For more information on the EnergyStar program, operated by the Department of Energy and the Environmental Protection Agency, visit the EnergyStar website at www.energystar.gov
Source: Federal Trade Commission Bureau of Consumer Protection Division of Consumer and Business Education
To figure out how much you’ll spend over the lifetime of the appliance, you have to look at all these costs. The appliance with the lowest initial purchase price, or even the one with the best repair record, isn’t necessarily the one that costs the least to operate. Here’s an example of how an appliance’s energy consumption can affect your out-of-pocket costs.
Suppose you’re in the market for a new refrigerator-freezer. Different models of refrigerators with the same capacity can vary dramatically in the amount of electricity they use. For one popular size and configuration, for example, the annual electricity consumption varies across models from a low of about 600 kilowatt-hours a year to a high of more than 800 kilowatt-hours a year. Based on national average electricity prices, that means the annual cost to operate this refrigerator can range from about $50 to $70, depending on which model you buy. A $20 difference in annual operating costs might not sound like much, but remember that you will enjoy these savings year after year for the life of the appliance, while you must pay any difference in purchase price only once. As a result, you may actually save money by buying the more expensive, more energy-efficient model.
You can learn about the energy efficiency of an appliance that you’re thinking about buying through the yellow-and-black EnergyGuide label it displays. The Federal Trade Commission’s Appliance Labeling Rule requires appliance manufacturers to put these labels on:
• Refrigerators, freezers, dishwashers, clothes washers
• Water heaters, furnaces, boilers
• Central air conditioners, room air conditioners, heat pumps
• Pool heaters
When you shop for one of these appliances in a dealer’s showroom, you should find the labels hanging on the inside of an appliance or secured to the outside. The law requires that the labels specify:
• The capacity of the particular model
• For refrigerators, freezers, dishwashers, clothes washers and water heaters, the estimated annual energy consumption of the model
• For air conditioners, heat pumps, furnaces, boilers and pool heaters, the energy efficiency rating
• The range of estimated annual energy consumption, or energy efficiency ratings, of comparable appliances.
Some appliances also may feature the EnergyStar logo, which means that the appliance is significantly more energy efficient than the average comparable model. For more information on the EnergyStar program, operated by the Department of Energy and the Environmental Protection Agency, visit the EnergyStar website at www.energystar.gov
Source: Federal Trade Commission Bureau of Consumer Protection Division of Consumer and Business Education
Tuesday, October 13, 2009
Tips to Lower Your Monthly Energy Bill
Being an energy-smart consumer means getting the most from the energy you use. Here’s how you can cut energy waste without sacrificing comfort or convenience.
• Move your refrigerator if it’s near the stove, dishwasher or heat vents. Vacuum the coils every three months to eliminate dirt buildup that reduces efficiency. Check the door gaskets for air leaks. Defrost the freezer when more than a quarter-inch of ice builds up.
• Scrape but don’t pre-rinse dishes by hand if you have a dishwasher that automatically pre-rinses or has a rinse/hold cycle. Use the “energy saver” option found on many machines.
• Use pots that fit the size of your stove-top burners. Use lids on your pots and pans so you can cook at a lower burner setting.
• Match the water level and temperature settings on your clothes washer to the size of your load. Don’t fill the whole tub for a few small items.
• Clean your clothes dryer filters after each use or as necessary.
• Ensure that the temperature on your water heater is set to 120 degrees. Some thermostats are preset at the factory to 140 degrees.
Source: Federal Trade Commission Bureau of Consumer Protection Division of Consumer and Business Education
Wednesday, October 7, 2009
Lighting Energy Saving Tips
We should all be concerned about saving energy as it benefits everyone in many ways. So start saving your share of energy by utilizing these great lighting tips.
Making improvements to your lighting is one of the fastest ways to cut your energy bills. An average household dedicates 10% of its energy budget to lighting. Using new lighting technologies can reduce lighting energy use in your home by 50% to 75%. Advances in lighting controls offer further energy savings by reducing the amount of time lights are on but not being used.
Indoor Lighting
Use linear fluorescent tubes and energy efficient compact fluorescent light bulbs (CFLs) in fixtures throughout your home to provide high-quality and high-efficiency lighting. Fluorescent lamps are much more efficient than incandescent (standard) bulbs and last about 6 to 12 times longer. Today’s CFLs offer brightness and color rendition that is comparable to incandescent bulbs. Although linear fluorescent and CFLs cost a bit more than incandescent bulbs initially, over their lifetime they are cheaper because of how little electricity they use. CFL lighting fixtures are now available that are compatible with dimmers and operate like incandescent fixtures.
Indoor Lighting Tips
• Be sure to buy ENERGY STAR qualified CFLs.
- They will save you about $30 or more in electricity costs over each bulb’s lifetime.
- Producing about 75% less heat, they are safer to operate and can cut home cooling costs.
- Visit www.energystar.gov to find the right light bulbs for your fixtures. They are available in sizes and shapes to fit in almost any fixture.
- They provide the greatest savings in fixtures that are on for a long time each day. The best fixtures to use qualified CFLs in are usually found in your family and living rooms, kitchen, dining room, bedrooms, and outdoors.
• Consider purchasing ENERGY STAR qualified fixtures. They are available in many styles including table, desk and floor lamps — and hard-wired options for front porches, dining rooms, bathroom vanity fixtures, and more.
• ENERGY STAR qualified fixtures distribute light more efficiently and evenly than standard fixtures and they deliver convenient features such as dimming on some indoor models. • Controls such as timers and photo cells save electricity by turning lights off when not in use. Dimmers save electricity when used to lower light levels. Be sure to select products that are compatible with CFL bulbs; not all products work with CFLs.
• When remodeling, look for recessed downlights, or “cans”, that are rated for contact with insulation (IC rated).
• Take advantage of daylight by using light-colored, loose-weave curtains on your windows to allow daylight to penetrate the room while preserving privacy. Also, decorate with lighter colors that reflect daylight.
• If you have torchiere fixtures with halogen lamps, consider replacing them with compact fluorescent torchieres. Compact fluorescent torchieres use 60% to 80% less energy and do not get as hot as halogen torchieres.
Outdoor Lighting
Many homeowners use outdoor lighting for decoration and security. When shopping for outdoor lights, you will find a variety of products, from low-voltage pathway lighting to motion-detector floodlights. Light emitting diodes, or LEDs, thrive in outdoor environments because of their durability and performance in cold weather. Look for ENERGY STAR LED products such as pathway lights, step lights, and porch lights for outdoor use.
Outdoor Lighting Tips
• Because outdoor lights are usually left on a long time, using CFLs in these fixtures will save a lot of energy. Most bare spiral CFLs can be used in enclosed fixtures that protect them from the weather.
• CFLs are also available as flood lights. These models have been tested to withstand the rain and snow so they can be used in exposed fixtures. Most though, cannot be used with motion detectors.
• Look for ENERGY STAR qualified fixtures that are designed for outdoor use and come with features like automatic daylight shut-off and motion sensors.
LED – A New Kind of Light
Light emitting diodes, or LEDs, offer better light quality than incandescent bulbs, last 25 times as long, and use even less energy than CFLs. Look for ENERGY STAR qualified LED products at home improvement centers and lighting showrooms.
Source: NAR Energy Savers: Tips on Saving Energy & Money at Home
Making improvements to your lighting is one of the fastest ways to cut your energy bills. An average household dedicates 10% of its energy budget to lighting. Using new lighting technologies can reduce lighting energy use in your home by 50% to 75%. Advances in lighting controls offer further energy savings by reducing the amount of time lights are on but not being used.
Indoor Lighting
Use linear fluorescent tubes and energy efficient compact fluorescent light bulbs (CFLs) in fixtures throughout your home to provide high-quality and high-efficiency lighting. Fluorescent lamps are much more efficient than incandescent (standard) bulbs and last about 6 to 12 times longer. Today’s CFLs offer brightness and color rendition that is comparable to incandescent bulbs. Although linear fluorescent and CFLs cost a bit more than incandescent bulbs initially, over their lifetime they are cheaper because of how little electricity they use. CFL lighting fixtures are now available that are compatible with dimmers and operate like incandescent fixtures.
Indoor Lighting Tips
• Be sure to buy ENERGY STAR qualified CFLs.
- They will save you about $30 or more in electricity costs over each bulb’s lifetime.
- Producing about 75% less heat, they are safer to operate and can cut home cooling costs.
- Visit www.energystar.gov to find the right light bulbs for your fixtures. They are available in sizes and shapes to fit in almost any fixture.
- They provide the greatest savings in fixtures that are on for a long time each day. The best fixtures to use qualified CFLs in are usually found in your family and living rooms, kitchen, dining room, bedrooms, and outdoors.
• Consider purchasing ENERGY STAR qualified fixtures. They are available in many styles including table, desk and floor lamps — and hard-wired options for front porches, dining rooms, bathroom vanity fixtures, and more.
• ENERGY STAR qualified fixtures distribute light more efficiently and evenly than standard fixtures and they deliver convenient features such as dimming on some indoor models. • Controls such as timers and photo cells save electricity by turning lights off when not in use. Dimmers save electricity when used to lower light levels. Be sure to select products that are compatible with CFL bulbs; not all products work with CFLs.
• When remodeling, look for recessed downlights, or “cans”, that are rated for contact with insulation (IC rated).
• Take advantage of daylight by using light-colored, loose-weave curtains on your windows to allow daylight to penetrate the room while preserving privacy. Also, decorate with lighter colors that reflect daylight.
• If you have torchiere fixtures with halogen lamps, consider replacing them with compact fluorescent torchieres. Compact fluorescent torchieres use 60% to 80% less energy and do not get as hot as halogen torchieres.
Outdoor Lighting
Many homeowners use outdoor lighting for decoration and security. When shopping for outdoor lights, you will find a variety of products, from low-voltage pathway lighting to motion-detector floodlights. Light emitting diodes, or LEDs, thrive in outdoor environments because of their durability and performance in cold weather. Look for ENERGY STAR LED products such as pathway lights, step lights, and porch lights for outdoor use.
Outdoor Lighting Tips
• Because outdoor lights are usually left on a long time, using CFLs in these fixtures will save a lot of energy. Most bare spiral CFLs can be used in enclosed fixtures that protect them from the weather.
• CFLs are also available as flood lights. These models have been tested to withstand the rain and snow so they can be used in exposed fixtures. Most though, cannot be used with motion detectors.
• Look for ENERGY STAR qualified fixtures that are designed for outdoor use and come with features like automatic daylight shut-off and motion sensors.
LED – A New Kind of Light
Light emitting diodes, or LEDs, offer better light quality than incandescent bulbs, last 25 times as long, and use even less energy than CFLs. Look for ENERGY STAR qualified LED products at home improvement centers and lighting showrooms.
Source: NAR Energy Savers: Tips on Saving Energy & Money at Home
Subscribe to:
Posts (Atom)